Photovoltaic Efficiency Explained


The term photovoltaic literally means light producing electricity. Turning photo (light) into voltaic (electrical current), is the basis of how solar panels work. So, photovoltaic efficiency refers to how efficiently a solar cell or solar module produces electricity.

Photovoltaic efficiency describes the efficiency or conductivity of solar panels – the percentage of radiation (sun) energy that can be converted into electrical energy.

Currently, photovoltaic efficiency of silicon crystalline solar panel modules is up to 22% [1] – meaning those systems convert up to 22% of the sun’s energy they’re exposed to into useable electricity. Crystalline silicon was the first mainstream solar technology, and continues to be the most commonly used.

New technology silicon thin-film photovoltaic module efficiency is up to 8% [1]. Although thin-film is less efficient, its advantages are that it’s less bulky, has more applications, and is easier and cheaper to produce and install.

It’s important to note that these records are for solar panel module efficiency (a circuit of multiple cells), not individual solar cells. Individual solar cell efficiency records are higher but less consistent.

Thin film solar panels are expected to become vastly more efficient as the solar and alternative energy race heats up.  Alta Devices Inc have developed a thin-film solar cell that’s achieved 28.4% efficiency. It uses gallium arsenide (GaAs) as a conductor, rather than the traditional silicon based conductors. [2]

Module Efficiency of Different Photovoltaic Technologies
Photovoltaic Technology Efficiency*
Silicon Crystalline 22%
Silicon thin-film 8%
Gallium arsenide crystalline (GaAs) 21%
GalnP/GaAs/GalnNAs Multijunction cell* 43%
* Figures rounded down to nearest percentage point.
** Multijunction data only available for individual cells – no module data available.

Exciting prospects: The recent industry boom has unveiled a number of new technologies and stepped up the photovoltaic efficiency competition.
Data taken from the Solar Cell Efficiency Tables (version 38) [4].

Photovoltaic efficiency not the only factor

Additional factors affect how much electricity a solar panel module will actually produce. Technical photovoltaic efficiency doesn’t necessarily mean solar panel efficiency.

Angle and location also weigh in on the efficiency of solar panels. You’ll need to figure out the optimal placement for your location to get maximum sun exposure hours.

In New Zealand, the north facing side of the house gets most sun exposure so New Zealanders install solar panels to face north, whereas solar panels in the United States generally face south.

sun tracking solar to boost efficiency
Boosting efficiency of solar panels with sun tracking – As the sun moves, the panels’ change angle.

photovoltaic efficiency - concentrating solar
Concentrated Solar – Large angled mirrors concentrate the sun’s radiation onto a few solar cells.

Solar tracker technology is another development which increases overall solar panel efficiency.

Commercial solar farms like the Montalto di Castro solar park in Italy use sun tracking systems to maximize the amount of time that solar panels are exposed to the sun’s radiation [3].

Similar systems are available for smaller scale private solar panels, however are less popular than static due to increased setup costs and maintenance.

Multijunction solar cells are another exciting new solar innovation. Individual solar cells (normally silicon) only react to a certain range of light depending on their molecular makeup – some silicon conducts and reacts to ultra-violet light, while other silicon reacts to infra-red light.

Multijunction solar cells combine layers of differently tuned silicon – so a single multijunction cell covers greater range of light and thus has a greater electricity production potential.

Concentrating solar is another technology increasing the efficiency of solar panels. This involves using mirrors to concentrate sun radiation on a single cell. Concentrated solar exposure equals greater power production.

Measures Beyond Efficiency of Solar Panels

Other measurements to be aware of when researching solar power are photovoltaic capacity and watt hours.

Photovoltaic capacity refers to the maximum power output a solar panel module is designed to produce – if the solar module were exposed to constant and direct radiation.

Photovoltaic power capacity ranges from large solar farm installations, such as Montalto di Castro with a peak capacity of 24 mega watts [3], to small residential solar modules with a capacity of 180 watts.

It’s important to note that photovoltaic efficiency and capacity of solar panels are useful as indications only – they’re not measures of actual production.

Time of day, amount of sunshine or cloud, location, and numerous other factors will influence actual solar power production levels. 

For these reasons, worldwide solar production is estimated to be around 25% of peak capacity levels.

Watt hours is the measurement of actual electricity produced.

Watt hours is arguably the most useful indication of a solar installation’s value as it can be directly compared to watt hours of electricity produced by traditional fossil fuel energy production or to how many watt hours a town or individual family uses.

Looking at watt hours presents a tangible cost comparison that solar panel efficiency doesn’t. The Montalto di Castro solar park for example produces around 40,000 mega watt hours (MWh) per year – enough to supply approximately 13,000 Italian houses [5].

Furthermore, by looking at expected watt hour generation, a cost per kWh figure can be calculated and compared.

Article References

[1] Green, M, A., Emery, K., Hishikawa, Y., Warta, W. (2011). Solar cell efficiency tables (version 37). Progress in Photovoltaics: Research and Applications, 19, 84-92.

[2] Jeanne Roberts. (2011). Alt Devices Inc. hits “sweet spot” in thin-film efficiency ratings. Energy Boom.

[3] SMA. (2011). Solar Park Montalto di Castro. SMA.

[4] Green, M, A., Emery, K., Hishikawa, Y., Warta, W., Dunlop, E, D. (2011). Solar cell efficiency tables (Version 38). Progress in Photovoltaics: Research and Applications, 19, 565-572.

[5] SunPower. Largest Solar Power Plant in Italy Completed. Retrieved from

Latest Comments

  1. shahrokh October 20, 2014
  2. Guillermo September 12, 2014
  3. Sean June 29, 2012
  4. Orhan May 30, 2012
    • Ilda August 18, 2012
  5. Greg May 4, 2012
  6. TAZ Anthony Ganderton April 29, 2012
    • Art May 30, 2012

Leave a Reply to Orhan Cancel reply